Myard MP UW35-DBR Umbrella Cone Wedge Spacer fits Patio Table Hole Opening or Base 2 to 2.5 Inches, Umbrella Pole Diameter 1-3/8 Inches (35mm, Dark Brown)

The gradated conical shape lets it fit the table hole just right, but it was a bear to put on. The center hole was too small for my umbrella pole, so I had to use household oil to help it. I took a scrap 1x4 and drilled a hole in it, then once I could get the pole completely through tapping it on the concrete I put it through the 1-by, put it between two stacks of patio pavers I had handy, and then pounded the pole to the right height with a rubber mallet.The gasket being rubber makes me more confident about the umbrella moving against the glass tabletop. It's a great concept, but maybe I missed there being different sizes to order?

I was tired of my umbrella constantly moving with the wind. This little rubber wedge shim works. Now we can be outside without constantly moving the umbrella back into place. good find

Make sure you measure the diameter of your umbrella pole to get the correct plug! I can't believe how well this color matched the bronze pole of our deck umbrella, and a little bit of dishwashing soap and it slides on perfect, it filled the table hole completely up! I wish I'd knew these existed years ago!

I have a 9-foot patio umbrella in a US Weight 50 Pound Umbrella Base (purchased on Amazon - 4 stars), passing through a 29.5" metal patio table. The center hole on the table is 2". No manner of fidgeting / adjusting / centering would keep the umbrella 90-degree vertical. A bit of wind or slight movement of the table, umbrella would lean. I ordered the MAYARD, arrived two days later. The umbrella's diameter is 1.5", identical to the MAYARD. To pass the umbrella tube through the cone, I first tried rubbing some kitchen dish soap on both the tube and the inside of the cone. Abandoned that idea, and opted for a bit of sandpaper - which turned out perfectly. I took 240-grit rolled into a circle, inserted into the cone, put slight pressure with my fingers and spun the cone around the sandpaper. A few spins, test fit tube into cone, a few more spins... Less than 5 minutes later, tube was snugly on cone. If you use this method, do a little bit at a time - you can always sand to make the hole bigger, but you can't make it smaller. A few pushes on the cone to wedge it tightly into the hole, done. We've had a several very windy and quite rainy days, the umbrella is still centered, perfectly. Only had it a few weeks, seems weatherproof; time will tell.

Product was easy to install and works really well for the umbrella around my pool

Most impressed with this product. Ended up buying another.

The concept for these wedges is great, if I would only have the right size shipped to me!I placed an order for 4 of the 35mm wedges. Installed one and it felt pretty loose so as I inspected it I discovered it was actually a 38mm size. Figured it was an honest mistake and placed another order after submitting a return on the first set.Same exact issue! The packaging states 35mm but the actual wedge has 38mm printed right on it. What do I need to do to get the right size shipped to me?

I bought this to ensure my patio umbrella fits snugly in the hole of my patio table and it works well. It fits and it holds the umbrella very securely. It has withstood a few thunderstorms so far and my umbrella has been sturdy through everything.I purchased this in brown by mistake, then ordered the black one as it would match my table better. However, the black one is a different size and does not fit the hole in my table at all; it's way too big. So, I am using the brown one and will give away the black one if someone can use it. So, be mindful of the measurements between the different colors. I assumed they were the same size, but they aren't.Overall, this works really well and I'm happy with it.

Super on n'a rien au Québec pour remplacer le petit caoutchouc qui sèche dans le milieu de la table à jardin à moins de le voler dans un magasin qui vendent des tables et ou le parasol n'est pas installé. Ce petit objet fait la job.

Fantastic product. Very versatile, can be used in many patio tables with different size umbrella holes.

Plastic insert for the patio table I have was lost for years and this piece did the trick of supporting umbrella. It stays where it should, fits multiple diameter holes and a decent option unless you want some aesthetically attractive. This piece looks average as the most.

I thought I would give these a try since my umbrella was always "slouching". They work as advertised, keeping the umbrella straight up. I recommend using 2 for each umbrella, one at the base and one midway up for best results.

It is so rare, but this product is exactly what I hoped it would be. Wedges perfectly into the round umbrella slot in my table. Holds the umbrella very tight - not just held down, but also prevents it from swinging around, which is important to me. A perfect, inexpensive solution that could have cost me close to $100 if I had bought a heavy, cumbersome base. This is really a great product!