G.SKILL Ripjaws V Series (XMP) DDR4 RAM 32GB (2x16GB) 3600MT/s CL16-19-19-39 1.35V Intel AMD Desktop Computer Memory UDIMM - Black (F4-3600C16D-32GVKC)

Great quality product. Fast latency for my build. I have never had any sort of problem with any G.Skill product. Would recommend over and over again. Looks great in my build (even though is not RGB).

This review is for G.SKILL Ripjaws V Series (Intel XMP) DDR4 RAM 32GB (2x16GB) 3600MT/s CL16-19-19-39 1.35V Desktop Computer Memory UDIMM - Black (F4-3600C16D-32GVKC). I have used G.Skill in several builds over the years, and I have never run into an issue with them. They also offer lifetime warranty that they stand behind. I liked this set for its combination of price, speed, timings, and voltage. I have this same memory kit in a 4 x 16 GB configuration (64 GB), but after using it for many years in two different systems, one of the RAM sticks had gone bad. So, while that set is off to G.Skill for RMA, I am using this 2 x 16 GB (32GB) kit in its place.G.Skill, and most memory makers, do not guarantee two kits of RAM to work together at overclocked or XMP rated speeds. So, if you are hoping to use two of these kits on a MB that supports 4 x 16GB RAM, you would be better off buying a single 4 x 16GB kit instead. It would alleviate so much confusion for buyer's who don't know how OC'd RAM works if manufacturers would start listing how OC'd RAM works on the packaging and in the details. This is something that all RAM manufacturers are guilty of.For those who don't know how OC'd RAM works. It is usually set to run at JEDEC (non-OC) speed out of the box. You usually have to go into the UEFI BIOS and manually set the bandwidth, timings, voltage, and command rate, or select XMP (if you have a MB and RAM that both support XMP) to get it to run at the advertised OC'd speed. If you are not familiar with setting up OC'd RAM contact the manufacturer. Many OC'd RAM sets have less than five star reviews from system builders who don't understand that OC'd RAM usually needs to be setup in the UEFI BIOS, so they assume there is a problem with the RAM when there isn't. On a side note, it is technically recommended that you run the RAM at the stock JEDEC speed when setting up a new system (i.e. installing the operating system and the like), however I have never run into an issue having XMP turned on when setting up a new system. Now, I have only used mildly overclocked RAM that did not require over-volting. If I were to run a highly overclocked RAM set that required over-volting, then that system I would definitely setup with the stock JEDEC settings.System Information:Gigabyte AORUS Z590 XtremeIntel i9-11900KZalman CNPS9900MAX-BlueThermal Grizzly KryonautASUS GeForce RTX 3070 V2 OC Edition 8GB GDDR64 x 16GB G.Skill Ripjaws V DDR4 3600 16-19-19-392 x 2TB Samsung 980 PRO NVMe M.2 SSD in RAID 1 Mirror1 x 2TB Seagate Constellation ES.3 SATA3 HDD1 x 4TB Samsung 870 EVO 2.5" SATA SSD in a Fideco external USB enclosure for backups2 x ASUS BD-RE BurnerCorsair AX1200i 1,200W PSUThermaltake Core W100 Super Tower ChassisWindows 10 Pro 64-Bit4 x Gigabyte AORUS FI25F 25" 240Hz 1080P IPS Monitor

I started using GSkill memory back when you first started seeing it listed. I tried it because I needed some memory and the price was lower than every other name brand. My first GSkill was DDR2 800 back in 2007 and I haven't used any other name brand since. It's just good reliable memory. I've never had any problems with GSkill since I started using it. Whenever I need ram I first look to GSKill. Never been disappointed.

It made my PC ram faster for sure

Easy install and was compatible with my hardware.

TLDR, the memory is decent. It's not G.Skill's fault that Amazon's policies allow for scammy behavior. Proceed with caution and make sure you actually receive what you paid for.Beware of scams! I bought this kit, and as I always do with memory, immediately installed the modules and loaded up the BIOS to make sure it was properly identified. Even though I ordered the F4-3600C16D-32GVKC kit, which consists of 2x16GB sticks, my BIOS said I had installed F4-3600C16-8GVKC modules, which are 8GB modules that belong to the F4-3600C16D-16GVKC kit. The labels on the modules claimed to be the 16GB modules, but clearly were not. Upon closer inspection, the module heatsinks had fingerprints on them and signs of heavy handling. They even felt a bit loose. I notified the seller, returned the modules, and ordered a new set. The new set arrived with the modules clearly opened and repackaged incorrectly with the branding facing the inside of the packaging. Tired of the back and forth, I installed the modules anyway to test them. This time the modules were the correct ones. I chose to keep them, but I have no idea how used they are.I hopped on Google to see if this was a common thing to find out that apparently this kind of fraud is rampant when buying memory on Amazon. Even though memory modules have tamper proof stickers, they don't have tamper proof heatsinks. People are using that to their advantage to swap out modules and return old ones as new. Amazon takes everyone's word for it, and sends the old modules to the next buyer as a new product. One of the key indicators of this is looking for an LPN label which shows up on packages that Amazon has received as a return but permitted them to go back into circulation as new. I checked the replacement module package, and sure enough, it had an LPN label on it.

I had to buy this kit to replace the exact same kit I bought 4 years ago that started to have errors. This new kit tested fine using MemTest86+. It operates at the XMP profile speeds without issue. My BIOS trained the RAM sticks after selecting DOCP settings in the BIOS.Although, SPD information shows the timings to be slightly different than what DOCP sets them up as, I changed them manually, so hopefully this pair of RAM doesn't fail anytime soon like the last pair did, which is really odd and rare for RAM to fail 4 years out. Usually failure occurs within the first year as defects not detected usually will cause failures much sooner.Aesthetically, the RAM looks really good in my computer case and matches the motherboard well. Being mostly black works as most components are black in my system. Installation was a bit of a pain because of my water cooler blocking part of the RAM modules at the top of the board, but that's not an issue caused by the RAM, and I can't find any reason to deduct points other than the XMP profile not being read correctly by the BIOS, but since it is an AMD platform, that is probably an issue with the motherboard and AMD, rather than the RAMs fault as well.