Question 1

anyone know why this only works onces on my car once i have cloned it?

Accepted Answer

To my knowledge this product is unsuitable for vehicles . as some vehicles have a scamble coding which means it changes after each use. depends on brand but new vehicle adopt a higher security coding.

Question 2

My existing remote has a HCS 200 chip, will your remote be able to clone it?

Accepted Answer

Not if its a rolling code

Question 3

How do you clone the remote

Accepted Answer

Code cleaning method:

Press the A button and B button at the same time, after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.

Copy method:

One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to back the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.

Question 4

After a successful copy of the codes, they appear to be erased/forgotten within a few days of not being used. I cannot imagine that this is by design?

Accepted Answer

This may be because your item uses rolling codes which change and the controllers do not support rolling codes properly. I bought some for my entry gate at my apartment. They worked a couple of times then stopped. And then I would programme them again and then they work once or twice and stop again I have some programmed with fixed codes and their are no problems.
Most cars now use rolling codes that change after every so many uses.
This is why if you press your buttons on your original remote several times when away from your car it will not work. And you have to bind it back to your car by putting it back in the ignition and other ways.
I know they are cheap but just ask for refund and spend a little more to get a proper one from Timpsons or other supplier. What do you expect from cheap Chinese stuff.
Once you get the refund then program the to your remote control plugs or something similar. You don't have to send them back. As I said its what I have done.

Manufacturer	QIACHIP
Product Dimensions	5.5 x 3 x 1.4 cm; 70 g
Batteries	1 CR2032 batteries required. (included)
Item model number	KT01 2pcs
Colour	Kt01 2pcs
Item Package Quantity	1
Special Features	No Programming Required
Batteries included?	Yes
Batteries Required?	Yes
Battery Cell Type	Alkaline
Battery description	Alkaline
Item Weight	70 g

QIACHIP 433mhz Remote Control Duplicator Garage Door Fob Copier 433.92 mhz Remote Electric Gate Fobs Replacement Wireless Keychain

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions