PGN (2 Pack) 6204-2RS Bearing - Lubricated Chrome Steel Sealed Ball Bearing - 20x47x14mm Bearings with Rubber Seal & High RPM Support

Perfect fit for my Honda HRX 217. For the longest time, I couldn't isolate the horrible noise coming from my mower, that would disappear when engaging the blades. I recieved two bearings for less than half the price of an OEM bearing. These are designed for higher RPMs than even the mower blade can go, so no problems there. The bearing is easy to replace provided you have a vise and some wrench sockets. I can't recall my mower running so quiet, except when jit was new about 11 years ago. Great value for the money, and if this one ever goes bad, I have a backup. Very pleased with the quality and performance for such a good price!

perfect bearing to replace the bad one in my power steering belt tensioner

Fast and seems to be good product

I used this as a replacement bearing for the drive shaft on a kawi ATV bayou 220. I did open the bearing seal to add more grease considering it is difficult to get to once installed. I recommend adding more grease, luckily I checked because I read on another review to add more grease.

Arrived on time,great quality and perfect fitItem as described mower noise gone

I installed new bearings into both of my mower deck spindles. I had no problem locating the smaller 6203 bearing locally, but not the 6204 without spending a lot of money.These worked great and do appear to be good quality and for a superb price.I would recommend them!!

Used to rebuild spindles on a John Deere 48X mower deck! Worked great, good quality!

I had the sealed bearings in a MTD style mower deck fail. I replaced the failed bearings with these bearings, 6204-2RS Sealed Bearings. It is an easy job and these bearings fit perfectly. Just keep track of the spindle components as you take it apart, install the new bearings, put the components back together in the same configuration. There are two bearings for each spindle and the order of 2 bearings will fix one spindle. Saved at least $25 dollars replacing the bearings instead of the spindle. The original bearings were made in China and so are these. The original bearings lasted 6 seasons and I expect these will too.